System Settings; Language Settings; Security Settings - Samsung BD-HM59 User Manual

The dLNA Function
DLNA lets you play music, video, and
photo files located in your PC on the
player.
To use DLNA with your player, you
must connect the player to your
network. (See pages 14~18).
To use DLNA with your PC, you must
install DLNA software on your PC.
For instructions explaining how to
play content located on your PC, see
page 21-22.

System Settings

Initial Settings
By using the Initial Settings function,
you can set the language, Network
Settings, etc.
For more information about the Initial
Settings function, refer to the Initial
Settings section of this user manual
(See page 10-11).
18
Quick Start
When set to On, Quick Start lets
the player start up more quickly be
decreasing the boot time.
✎
NOTES
If this function is set to On, Standby
■
power consumption will be
increased.
Anynet+ (HdmI-CEC)
Anynet+ is a convenient function that
offers linked operations with other
Samsung products that have the
Anynet+ feature.
To operate this function, connect this
player to an Anynet+ Samsung TV
with an HDMI cable.
With Anynet+ on, you can operate
this player using a Samsung TV
remote control and start disc playback
simply by pressing the pLAy (
button on the TV's remote control.
For more information, please see the
TV user manual.
✎
NOTES
This function is not available if the
■
HDMI cable does not support CEC.
If your Samsung TV has an Anynet+
■
logo, then it supports the Anynet+
function.
Depending on your TV, certain HDMI
■
output resolutions may not work.
Please refer to the user manual of
your TV.
If you have Anynet+ turned on, when
■
you turn off the product, disconnect,
and then reconnect the power cable,
the product turns on automatically to
re-establish the Anynet+ connection.
After about 15 seconds, it turns off
again automatically.
Some Samsung TVs, when
■
connected to this product using the
Anynet+ function will, when you turn
them on, display a warning popup
message saying no connection has
been found. Never-the-less, the
Anynet+ connection is properly
established and available to use
Bd data management
Enables you to manage the
downloaded contents you accessed
through a Blu-ray disc that supports
the BD-LIVE service and stored on a
flash drive.
You can check the device's information
including the storage size, delete the
BD data, or change the Flash memory
)
device.
✎
NOTES
In the external memory mode, disc
■
playback may be stopped if you
disconnect the USB device in the
middle of playback.
Your player supports the FAT16,
■
FAT32, and NTFS file systems. We
recommend you use USB devices
that support the USB 2.0 protocol
with 4 MB/sec or faster read/write
speed.
The Resume Play function may not
■
work after you format the storage
device.
The total memory available to BD
■
Data Management may differ,
depending on the conditions.

Language Settings

You can select the language you
prefer for the On-Screen menu, disc
menu, audio, and subtitles.
✎
NOTES
The selected language will only
■
appear if it is supported on the disc.
.

Security Settings

When you access this function for
the first time, the PIN screen appears.
Enter the default PIN - 0000 - using
the number buttons. To change the
PIN, use the Change PIN function.
Each time you access the Security
Settings hereafter, you must enter that
four digit PIN. If you don't change the
PIN, continue using the default PIN.