Samsung BD-HM59 User Manual page 15

Wired - manual
Ğ
If you have a static IP address or
the Automatic procedure does not
work, you'll need to set the Network
Settings values manually.
Follow Steps 1 and 2 in Wired -
Automatic, and then follow these
steps:
1. Select Network Status. The player
searches for a network, and then
displays the connection failed
message.
2. On the bottom of the screen,
select Ip Settings, and then press
the v button.
The IP Settings screen appears.
3. Select the IP Setting field, and
then press the v button.
4. Select Enter manually in the IP
Setting field, and then press the
v button.
5. Select a value to enter (Ip Address,
for example), and then press the
v button.
Use the number keypad on your
remote control to enter the numbers
for the value. Use the ◀▶ buttons
on the remote control to move from
entry field to entry field within a
value. When done with one value,
press the v button.
6. Press the ▲ or ▼ button to move to
another value, and then enter the
numbers for that value following
the instructions in Step 5.
7. Repeat Steps 5 and 6 until you
have filled in all values.
✎
NOTES
You can get the Network values
■
from your Internet provider.
8. When finished entering all the
values, press the RETURN or ExIT
buttons. The player verifies the
network connection and then
connects to the network.
Wireless Network
You can setup a wireless network
connection in four ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
- WPS(PIN)
When you configure the wireless
network connection, any wireless
network devices currently connected
through the player or, if applicable,
the player's current wired connection,
will be disconnected.
Wireless - Automatic
Ğ
1. In the Home screen, select Settings,
and then press the v button.
2. Select Network, and then press
the v button.
3. Select Network Settings, and then
press the v button.
4. Select Wireless in the Network
Settings screen, and then press
the v button. The player
searches for and then displays a
list of the available networks.
Network Settings
Select your network type.
Network type Wireless
Wireless network
you can connect your Blu-ray
Add Network
player to the internet. please
select which wireless network
to use.
WpS(pBC) Search
m move " Select ' Return
5. Select the desired network, and
then press the v button.
6. On the Security screen, enter your
network's Security Code or Pass
Phrase.
Enter numbers directly using the
number buttons on your remote
control. Enter letters by selecting
a letter with an arrow button, and
then pressing v button.
7. When finished, select done and then
press the v button. The player
verifies the network connection and
then connects to the network.
8. When verification is complete,
select OK, and then press the v
button.
✎
NOTES
You should be able to find the
■
Security Code or Pass Phrase on
one of the set up screens you used
to set up your router or modem.
Wireless - manual
Ğ
If you have a static IP address or
the Automatic procedure does not
work, you'll need to set the Network
Settings values manually.
1. Follow the directions in Wireless -
Automatic through Step 5.
2. The player searches for a network,
and then displays the connection
failed message.
3. On the bottom of the screen,
select Ip Settings, and then press
the v button.
The IP Settings screen appears.
4. Select the IP Setting field, and
then press the v button.
5. Select Enter manually in the IP
Setting field, and then press the
v button.
6. Select a value to enter (Ip Address,
for example), and then press v
button. Use the number keypad
on your remote control to enter
the numbers for the value. Use
the ◀▶ buttons on the remote
control to move from entry field
to entry field within a value.
When done with one value, press
the v button.
7. Press the ▲ or ▼ button to move to
another value, and then enter the
numbers for that value following
the instructions in Step 6.
8. Repeat Steps 6 and 7 until you
have filled in all values.
✎
NOTES
You can get the Network values
■
from your Internet provider.
9. When finished, and then press
the RETURN or ExIT buttons. The
Security Screen appears.
15