Changing Administrator Password - D-Link DSL-2540U Quick Installation Manual

DSL-2540U

Changing Administrator Password

It is highly recommended to change the administrator password used to access
the web-based interface of the router upon initial configuration. This helps you
to improve your network security.
1. Go to the System / Administrator password page.
2. Enter a new password for the administrator account in the Password
and Confirmation fields.
3. Click the Save button.
Remember or write down the new password for the administrator
!
account. In case of losing the new password, you can access the web-
based interface of the router only after restoring the factory default
settings via the hardware Reset button. This procedure wipes out all
settings that you have configured for your router.
Saving Settings to Non-volatile Memory
In order to avoid losing the new settings upon hardware reboot (accidental or
intentional power-off of the device), it is recommended to save the settings to
the non-volatile memory of the router.
Click the Save&Reboot line in the top-page menu displayed when the mouse
pointer is over the System caption.
Wait until the router is rebooted. Now you can use it to access the Internet or
access the web-based interface of the router to configure additional parameters
(for detailed description of every page of the web-based interface, see the
"User Manual" document).
Quick Installation Guide
13