Ethernet Wan Connection - D-Link DSL-2540U Quick Installation Manual

DSL-2540U

Ethernet WAN Connection

1. Go to the Advanced / Interface grouping page.
2. Select the Enable virtual ports checkbox.
3. Select the choice corresponding to the LAN port that will be used as the
WAN port of the Ethernet WAN port radio button, and click the Save
button.
4. Go to the Net / Connections page and click the Add button.
5. In the General settings section, specify a name for your connection
(any name for easier identification) in the Name field and select a type
for your connection from the Connection Type drop-down list (for the
Static IP and DHCP connection types select the IPoE value).
6. In the Physical layer section, select the value corresponding to the
LAN port that will be used as the WAN port from the Physical
interface drop-down list.
Quick Installation Guide
10