Toro LT3340 Operator's Manual page 16

Warning Systems
Engine Coolant Overheating Warning Light
The engine coolant warning light illuminates, the horn is
actuated and the cutters stop (Figure 15).
1
Figure 15
1. Engine coolant overheating warning light
Hydraulic Oil Overheating Warning Light
The hydraulic oil warning light illuminates when overheating
occurs and the horn is actuated when the hydraulic oil in the
reservoir exceeds 95 degrees C (203 degrees F) (Figure 16).
1
Figure 16
1. Hydraulic oil overheating warning light
G014551
G014552
Low Battery Charge Warning Light
The battery charge warning light illuminates when low battery
charge occurs (Figure 17).
1
1. Low battery charge warning light
Low Engine Oil Pressure Warning Light
The engine oil pressure warning light illuminates when the oil
pressure is too low (Figure 18).
1
1. Low engine oil pressure warning light
Disengagement of Cutting Cylinders
The cutting cylinders will disengage when the operating
temperature reaches 115 degrees C.
Audible Warning Horn
Depress the horn button to provide an audible warning
(Figure 19).
Important: The horn is automatically actuated when
an engine coolant or hydraulic oil overheat condition
occurs. STOP the engine immediately and fix the
machine before restarting.
1
1. Horn
16
G014553
Figure 17
G014554
Figure 18
G014555
Figure 19