Cleaning; Cleaning Under The Mower - Toro 74255 Operator's Manual

Figure 78
1. Bolt
2. Spacer
3. Locknut
4. Spring

Cleaning

Cleaning Under the Mower

Remove the grass buildup under the mower daily.
1. Disengage the PTO, move the motion control
levers to the neutral locked position and set
the parking brake.
2. Stop the engine, remove the key, and wait for
all moving parts to stop before leaving the
operating position.
3. Raise the mower to the transport position.
4. Raise the front of the machine by using
the Z Stand; refer to Using the Z Stand in
Operation, page 15.
5. Spring installed
6. Grass Deector
7. L end of spring, place
behind deck edge before
installing bolt
8. J hook end of spring
Unit could fall onto someone and cause
serious injury or death.
• Use extreme caution when operating
unit on Z Stand.
• Use only for cleaning mower and
removing blades.
• Do not keep unit on Z Stand for
extended periods of time.
• Always shut engine off and set
parking brake before performing any
maintenance to mower.
56