The Back Panel - TP-Link archer c2 User Manual

Chapter 1
1. 2. 2.

The Back Panel

The following parts (view from left to right) are located on the rear panel.
Item
Ethernet Ports (1/2/3/4)
Internet Port
Wi-Fi/WPS
Reset Hole
Power On/Off Button
Power Port
Antennas
For connecting your PCs or other wired network devices to the router.
For connecting to a DSL/Cable modem, or an Ethernet port.
To turn on/off the Wi-Fi function by pressing until the 2.4Ghz LED and 5Ghz LED
on/off.
To enable the WPS function, press this button about 2 seconds. If you have a WPS-
supported device, you can press this button to quickly establish a connection
between the router and the client device and automatically configure wireless
security for your wireless network.
Use a pin to press and hold this button until the Power LED starts blinking to reset
the router to its factory default settings.
Press this button to power on or off the router.
For connecting the router to power socket via the provided power adapter.
Used for wireless operation and data transmit. Upright them for the best Wi-Fi
performance.
Get to Know About You Router
Description
5