Open Ports Dynamically By Port Triggering - TP-Link archer c2 User Manual

Chapter 9
Done!
9. 2.

Open Ports Dynamically by Port Triggering

Port Triggering can specify a triggering port and its corresponding external ports.
When a host in the local network initiates a connection to the triggering port, all the
external ports will be opened for subsequent connections. The router can record the IP
address of the host, when the data from the Internet return to the external ports, the
router can forward them to the corresponding host. Port Triggering is mainly applied to
online games, VoIPs, video players and common applications including MSN Gaming
Zone, Dialpad and Quick Time 4 players, etc.
Follow the steps below to configure the Port Triggering rules:
Tips:
1. It is recommended to keep the default settings of
are not clear about which port and protocol to use.
2. If the service you want to use is not in the
corresponding parameters manually. You should verify the port number that the
service needs.
3. You can add multiple virtual server rules if you want to provide several services in
a router. Please note that the
Users on the Internet can enter
http:// 218.18.232.154) to visit your personal website.
Tips:
1. WAN IP should be a public IP address. For the WAN IP is assigned dynamically by
ISP, it is recommended to apply and register a domain name for the WAN referring
to Set Up a Dynamic DNS Service
http:// domain name to visit the website.
2. If you have changed the default
http:// WAN IP: External Port
website.
Internal Port
Service Type, you can enter the
External Port should not be overlapped.
http:// WAN IP
Account. Then users on the Internet can use
External Port, you should use
or http:// domain name: External Port
NAT Forwarding
and Protocol if you
(in this example:
to visit the
42