Beko WMY101444 LB3 User Manual page 21

C
When you select this function, load your machine with half of the maximum laundry specified in the programme table.
• Rinse Plus
This function enables the machine to make another rinsing in addition to the one already made after the main
wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected by the minimal detergent
remnants on the laundry can be reduced.
• Night mode
Use to wash the cottons with lesser energy consumption and silently. Spin steps are cancelled for a silent
washing and the cycle ends with the Rinse Hold step. After completion of the programme, run Spin cycle to
spin the laundry.
Time display
Remaining time for the completion of the programme while it is running is displayed as "01:30" in hours and
minutes format.
C
Programme time may differ from the values in the "Programme and consumption table" depending on the water pressure,
water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected and the
changes at the mains voltage.
4.3.9 End Time
With the End Time function, the startup of the programme may be delayed up to 24 hours. After pressing End
Time button, the programme's estimated ending time is displayed. If the End Time is adjusted, End Time
indicator is illuminated.
In order for the End Time function is activated and the programme is completed at the end of the specified
time, you must press Start / Pause button after adjusting the time.
If you want to cancel End Time function, press On / Off button to turn off and on the machine.
C
Do not use liquid detergents when you activate End Time function! There is the risk of staining of the clothes.
1 Open the loading door, place the laundry and put detergent, etc.
2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3 Set the end time of your choice by pressing the End Time button. End Time indicator illuminates.
4 Press Start / Pause button. Time countdown starts. ":" sign in the middle of the end time on the display
starts flashing.
C
Additional laundry may be loaded during the End Time countdown period. At the end of the countdown, End Time indicator
turns off, washing cycle starts and the time of the selected programme appears on the display.
When the End Time selection is completed, the time appears on the screen consists of end time plus the duration of the
selected programme.
21 / EN
88
C
0
88:88
1888
88
C
0
88:88
1888
Washing Machine / User's Manual