Advertisement
OS/2
The NetBEUI protocol must be active. If not, use MPTN/LAPS
(LAN Server) or SETUP (LAN Manager) to activate it.
Install the Axis Print Utility and your NPS 650:
1. Install the Axis Print Utility for OS/2: Insert the disk included
with your delivery, and execute a:\axpu\install.exe.
2.
When Axis Print Utility is running, click Install to install your
NPS 650. It will then appear in the print server list as
AX<nnnnnn>.LP1, AX<nnnnnn>.LP2 and
AX<nnnnnn>.CM1 (<nnnnnn> are the last six digits of your
NPS 650 serial number).
3. Select the print servers you want to install by clicking the
corresponding entries in the list, then click Install.
Repeat this procedure for each server using the NPS 650.
Important: Axis Print Utility must be running when you print
through your NPS 650.
Create a Print Queue (OS/2 version 1.x):
1. Double-click the Print Manager icon, click Setup, then select
Printers...
2. Click Add to make a new printer definition, then type a name of
your choice in the Name field.
3. Select \PIPE\AX<nnnnnn>.LP1 from the Device list, and select a
printer driver suitable for your printer.
4. Click Add, then click OK to confirm the printer definition.
5. Click Setup, then select Queues...
6. Click Add to create a print queue, and type a name in the Name
field.
7. Click Add, then click OK to confirm the queue definition.
Create a Print Queue (OS/2 version 2.x):
1. Double-click the Templates folder, then drag the Printer icon out
to the Workplace Shell (or into a folder) while holding the right
mouse button down.
2. Type a name of your choice in the Name field.
3. Select \PIPE\AX<nnnnnn>.LP1 from the Port list, and select a
printer driver suitable for your printer from the Standard printer
list.
4. Click OK to confirm the printer definition.
Advertisement
