Checking Chain Lubrication
The saw chain must always throw off a
small amount of oil.
NOTICE
Never operate your saw without chain
lubrication. If the chain runs dry, the
whole cutting attachment will be
irretrievably damaged within a very short
time. Always check chain lubrication and
the oil level in the tank before starting
work.
Every new chain has to be broken in for
about 2 to 3 minutes.
After breaking in the chain, check chain
tension and adjust if necessary – see
"Checking Chain Tension".
MSE 220 C
Coasting Brake
A
B
The coasting brake brings the running
chain to a standstill when you let go of
the trigger switch.
A
Coasting brake stops the running
chain.
B
Trigger switch not fully released,
coasting brake is not activated – the
chain continues running for several
seconds.
Chain Brake
Locking the chain
in an emergency
–
The chain brake is activated by pushing
the hand guard toward the bar nose with
your left hand – or by inertia in certain
kickback situations: The chain is
stopped and locked.
English
17