Table of Contents
Advertisement
Installation
Set up for recirculation mode
If site conditions are not suitable for the
rangehood to be used with air
extraction, the appliance must be set
up for recirculation.
For this, a conversion kit DUU 151,
available from Miele, is required.
You will also need a charcoal filter (see
"Technical data").
28
^ Fit the conversion kit as described in
the installation instructions supplied
with the kit.
^ Make sure that the slats on the
exhaust grille are directed towards
the middle of the room, and not
towards the wall or the ceiling.
A non-return flap is not used in
recirculation mode.
^ Fit the charcoal filter (see "Cleaning
and Care").
Electrical connection
Refer to the notes in "Electrical
connection" and "Warning and
Safety instructions" before
connecting to the electricity supply.
^ Plug the connection cable into a wall
socket.
Hide quick links:
Advertisement
Table of Contents
