Table of Contents
Advertisement
Installation
Adjusting the building-in depth
^ The position of the deflector plate
can be brought forward by up to
35 mm using the adjusting screws on
either side of the canopy.
Then align the deflector plate with the
front of the adjacent furniture units.
26
Fitting the grease filter
^ Remove the protective strip around
the edge of the grease filter.
Fit the grease filter.
^ To do this, pull out the deflector
plate.
^ Turn the grease filter so that the red
plastic guides are at the front and
facing upwards.
^ Replace the grease filter in the front
of the deflector plate, press it
upwards and push it in together with
the deflector plate. It will slide onto
the fixing pins at the back. Finally,
push the grease filter back a little
more.
Hide quick links:
Advertisement
Table of Contents
