Important Safety Instructions - Nautilus T624 Assembly And Owner's Manual

Hide thumbs Also See for T624:
Table of Contents

Advertisement

When using an electrical appliance, basic precautions should always be followed, including the following:
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious
injury.
Obey the following warnings:
Read and understand all warnings on this machine.
Carefully read and understand the Assembly instructions. Read and understand the complete
Manual. Keep the Manual for future reference.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug this
machine from the electrical outlet immediately after using and before cleaning.
To decrease the risk of burns, electric shock, or injury to persons, read and understand the com-
plete Owner's Manual. Failure to follow these guidelines can cause a serious or possibly fatal electrical shock or
other serious injury.
Keep bystanders and children away from the product you are assembling at all times.
Do not connect power supply to the machine until instructed to do so.
The machine should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting
on or taking off parts.
Before each use, examine the machine for damage to power cord, loose parts or signs of wear. Do not use if found in
this condition. Contact your local distributor for repair information.
Not intended for use by persons with medical conditions where those conditions may impact the safe operation of the
treadmill or pose a risk of injury to the user.
Do not drop or put objects into any opening of the machine.
Never operate this treadmill with the air openings blocked. Keep the air openings free of lint, hair and the like.
Do not assemble this machine outdoors or in a wet or moist location.
Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders.
Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps
involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.
Set up this machine on a solid, level, horizontal surface.
Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and
will void the warranty.
If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use
genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the
warranty.
Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the
Manual.
Use this machine only for its intended use as described in this manual. Do not use attachments not recommended by
the manufacturer.
Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.
Connect this machine to a properly earthed outlet only (see Earthing Instructions).
Keep the power cord away from heat sources and hot surfaces.
Do not operate where aerosol products are being used.
To disconnect, turn all controls to the off position, then remove plug from outlet.
SAVE THESE INSTRUCTIONS.

IMPORTANT SAFETY INSTRUCTIONS

3

Advertisement

Table of Contents
loading

Table of Contents