Iq Address Tables - Crown IQ-MC4 Reference Manual

7 IQ Address Tables

The following pages in this section
contain lookup tables for every valid
IQ address. The valid addresses are
1 to 250. Remember that address "0"
(zero) will put the IQ-MC into a stand-
alone mode where it is invisible to the
IQ System and acts like a "dumb"
balanced audio input. Do not use an
address number higher than 250!
Addresses above 250 are reserved
for special system use.
Page 24
Remember: No two IQ components
of the same type which are connected
to the same IQ Bus loop can have the
same address.
To use the IQ address tables, simply
find the address you want and set the
IQ address switch of the IQ-MC mod-
ule as shown.
IQ-MC Modules
Reference Manual