Page 1
Note: The information provided in this manual was deemed accurate as of the publication date. However, updates to this information may have occurred. To obtain the latest version of this manual, please visit the Crown website at www. crownaudio.com. 101641-5...
fi rmly push the unit in until it is seated against the mounting bracket (see Figure 2.3). PIP2 Amplifi ers*: (Requires a PIP2 input adaptor, Crown part number Q43528-1.) Con- nect the PIP2 input adapter Fig. 2.2 PIP2 Input Adapter...
Page 5
P.I.P.-CLP and result in a distorted signal. Reference Manual Remember: Crown is not liable for any damage resulting from over- driving other components in your sound system. Crown Audio Technical Support / Factory Service 1718 W.
This is fi ne if it’s what you want. But if you don’t want it and you can’t get rid of it, it’s a problem. This is why Crown amplifi ers are designed to deliver maximum power without distortion or hidden compressors to make them sound louder.
Page 7
P.I.P.-CLP There are two possible modifi ca- tions; the fi rst increases the attack time while the second doubles both attack and decay times. Modifi cation A will increase the attack time from the original 0.35 milliseconds to 5 milliseconds. It does not affect the original decay time which is 160 milliseconds.
Page 12
P.I.P.-CLP For Technical Support contact: Crown Audio Technical Support Group 1718 W. Mishawaka Rd., Elkhart, Indiana 46517 U.S.A. Phone: 800-342-6939 (North America, Puerto Rico and Virgin Islands) or 574-294-8200 Fax: 574-294-8301 Internet: http://www.crownaudio.com Reference Manual Page 12...