Advertisement
CONVERTING TO LP GAS
4. To prevent leakage, make sure the
orifice spuds are securely screwed into the gas
inlet tubes.
5. Put old orifice spuds back in the bag to save
for possible future conversion.
NOTE: If an orifice
spud is accidentally
dropped, the cooktop
can be raised by
releasing the 2 front
clips with a large flat
blade screwdriver.
When lowering it, make sure it snaps over
the clips.
46
or Converting Back to Natural Gas from LP
(Sealed Burner models only)
4
CONVERT THE OVEN BURNER ORIFICES
Oven Burner
1. Remove oven door, storage drawer or broiler
drawer, oven bottom and burner baffle (on some
models). The lower burner orifice spud is
located behind the storage drawer, broiler
drawer or kick panel. (On some models, a metal
shield must be removed to access the orifice.)
2. To convert to LP gas,
use a 1/2" wrench to
turn the lower burner
orifice spud clockwise.
Tighten the spud only
until it is snug. To
prevent damage, do not
overtighten the spud.
To convert to natural gas,
loosen the spud about 2 turns.
Broil Burner
(on some models)
To convert to LP gas, use a 1/2" wrench to
turn the upper burner orifice spud clockwise.
Tighten spud only until it is snug with the base.
To prevent damage, do not overtighten spud.
To convert to natural gas, loosen the spud
about 2 turns.
Advertisement
