Settings - Zanussi ZWF 91483WH User Manual

Rinse only
With this option you can perform only a last
rinse of a selected washing programme.
If you set also the Extra Rinse function (
appliance adds two or more rinses.
The related indicator comes on.
Drain and Spin
With this option you can perform the spin and
drain cycle.
This spin phase is suitable to the washing
programme you set.
If you set also the No Spin (
option, the appliance only drains.
Finish In
With this option you can set the number of
hours in which you would like your washing
programme to be completed.

Settings

Extra Rinse
With this option you can permanently have an
extra rinse when you set a new programme.
• To activate/deactivate this option touch
the buttons and
the indicator comes on/goes off.
Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option, touch
the buttons and
the indicator comes on/goes off.
Activate this option after you touch the button
: the buttons are locked (except for the
button ) .
1) See in "Settings" how to activate this option.
www.zanussi.com
) the
)
at the same time until
at the same time until
You can set from minimum 3 hours to maximum
20 hours.
The display shows the number of hours and the
indicator above the button
Extra Rinse
With this option you can add some rinses to a
washing programme.
Use this option for persons allergic to
detergents and in areas where the water is soft.
The related indicator comes on.
This option stays active even when
you switch off the appliance.
Acoustic signals
The acoustic signals operate when:
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic signals,
touch the buttons
for 4 seconds.
If you deactivate the acoustic
signals, they continue operate when
the appliance has a malfunction.
is on.
1)
and at the same time
9