Sharp R-331ZS Operation Manual page 15

C O N T R O L S
COOKING IN ONE STAGE
X6
2. Touch number pads for the cooking time.
3. Touch START pad.
When you touch START pad, the M/W indicator starts blinking to show the oven is cooking.
The display counts down the time to show how much cooking time is left. When the cooking time ends, you will
hear 3 beeps.
NOTE : U sing lower power levels increases the cooking time which is recommended for foods such as cheese,
milk and slow cooking of meats.
COOKING IN TWO STAGES
All recipes require the frozen foods to be defrosted fully before cooking.
This oven can be programmed to automatically defrost foods before cooking.
2. Touch number pads for the defrosting time you want.
X6
4. Touch number pads for the desired cooking time.
5. Touch START pad.
When you touch START pad, the Defrost and M/W indicators come on to confirm the power levels selected. The
Defrost indicator starts blinking to show you that the oven is in DEFROST mode.
The display counts down the time remaining in DEFROST mode. When the oven beeps, turn over, break apart
and/or redistribute the food. At the end of DEFROST mode, the oven will beep and start M/W cook.
The Defrost indicator goes off and the M/W indicator starts blinking. The display counts down the time remaining in
M/W mode. When M/W cook ends, you will hear 3 beeps.
R-331ZS(KOR1NAJWTAE009RB00)( )_SHARP.indd 15
1. Touch POWER pad.
(Select the desired power level.)
1. Touch DEFROST pad.
3. Touch POWER pad.
(Select the desired power level.)
The M/W indicator lights.
The display will show what you touched.
This example shows power level 5.
The display will show what you touched.
NOTE : Your oven can be programmed for
59 minutes 99 seconds. (59 : 99)
The Defrost indicator lights and " : 0" is displayed.
The display will show what you touched.
The M/W indicator lights and "P-HI" is displayed.
The display will show what you touched.
This example shows power level 5.
The display will show what you touched.
15
2015-03-31 2:40:01