Advertisement
1. Introduction
This document describes the Phoenix BIOS™ Setup utility for the SBI-7125B-T1 Intel
Blade Module. The Phoenix ROM BIOS is stored in a flash chip and can be easily
upgraded using a floppy disk-based program. See Chapter 9 of the Intel SuperBlade
User's Manual (MNL-0975) for further details.
2. Running Setup
NOTE: Default settings are in bold text unless otherwise noted.
The BIOS setup options described in this section are selected by choosing the
appropriate text from the M
section, although the screen display is often all you need to understand how to set the
options.
When you first power on the computer, the BIOS is immediately activated.
While the BIOS is in control, the Setup program can be activated in one of two ways:
1. By pressing <D
2. When the message Press the <Delete> key to enter Setup appears briefly at the
bottom of the screen during the POST, press the <D
S
menu:
ETUP
3. Main BIOS Setup
All main Setup options are described in this section.
Use the U
/D
P
OWN
the L
/R
arrow keys to change the options for each setting.
EFT
IGHT
Press the <E
> key to exit the CMOS S
SC
detail how to navigate through the menus.
Items that use sub-menus are indicated with the
press the <E
NTER
Menu options found in the M
SBI-7125B-T1
BIOS Setup Manual
BIOS S
AIN
> immediately after turning the system on, or
ELETE
arrow keys to move among the different settings in each menu. Use
> key to access the submenu.
BIOS S
AIN
screen. All displayed text is described in this
ETUP
menu. The next section describes in
ETUP
icon. With the item highlighted,
menu are shown in the
ETUP
1
> key to activate the main
ELETE
Table
1.
Advertisement
