VALVE LOCK
To avoid injury from crushing:
A Do not utilize the valve lock for machine
maintenance or repair.
A The valve lock is to prevent accidental
actuation when implement is not in use or
during transport.
The control valve is equipped with a valve lock feature.
The control valve is locked in the neutral position.
The lock is not intended and will not prevent a leak down
of the implement during the period of storage.
BValve Lock
(1) Lock lever
BUCKET LEVEL INDICATOR
Depending on the front attachment, loosen the indicator
rod lock bolt and readjust the indicator rod length.
(1) Bolt
(2) Indicator rod
(3) Guide, Indicator rod
(A)
"Lock"
(B)
"Unlock"
OPERATING THE LOADER
BOOM CYLINDER FULCRUM
A Before repositioning the boom cylinder fulcrum, place
the front attachment in contact with a flat ground.
This loader is provided with two boom cylinder fulcrums (A
and B). The top fulcrum (A) is used when more lifting
height is needed. The bottom fulcrum (B) is employed
when more lifting force is required.
A When
the
boom
repositioned, make sure that the left and right fulcrum
positions (A and B) are the same. Then proceed to the
job.
(1) Boom Cylinder
(2) Frame, Side
cylinder
fulcrum
has
(A) Top fulcrum
(B) Bottom fulcrum
17
been