Troubleshooting - Vinotemp VT-58 Owner's Manual

You can solve many common cooler problems easily, saving you the cost of a possible service call.
Try the following suggestions to see if you can solve the problem before contacting Vinotemp at
info@vinotemp.com.
PROBLEM
Door will not close
properly
Unit does not operate—
does not have power
Power is ON but the unit
will not cool
Fan is always running
Vibrations
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1

TROUBLESHOOTING

POSSIBLE CAUSE
The wine cellar is not level.
The shelves are out of position.
The door was reversed and not properly installed.
The door gasket is dirty.
A bottle in the cellar is too long.
Check that unit is plugged into the wall socket.
Make sure the wall socket has power.
If outlet is controlled by a wall switch, make sure switch is set to on.
Test wall socket functionality by testing another electrical appliance
in the power socket.
When using the unit for the first time, make sure there are at least 3
to 5 bottles in the unit. It can take up to 24 hours to reach the
desired temperature.
If the room temperature is above 90°F (32°C), the unit will not get
below 51°F (11°C). Humidity does not affect the cooling ability of the
unit.
To achieve accurate temperature control, the unit should not be
used or operated in any of the following locations:
o
In a sunny place
o
In a room with poor air circulation such as a garage near
another heat-producing appliance such as a dishwasher,
oven or refrigerator.
o
With an outlet shared with a refrigerator as the refrigerator
will drain power from the wine cellar.
o
In a cabinet or closet.
Make sure the cooling vents are not obstructed.
This is simply a function of the cooling system. The lower the setting,
the more the fan will run. If the room is warmer than 90°F (32°C), it
will run more.
The unit has been designed to run continuously when operating at
the lower temperatures.
Check to ensure the unit is level.
i n f o @ v i n o t e m p . c o m
13