Automatic Transfer Switch - NewMar 2006 Mountain Aire Diesel Pusher User Manual

hour meter installed on the generator calculates the number of running hours
of the generator motor. This is used for maintenance schedules.
CAUTION
Failure to turn off the 120 volt appliances when starting or stopping the
generator may damage the transfer switch and/or electrical appliances.
Consult the manufacturer owner's manual for detailed operating instructions.

Automatic Transfer Switch

Your unit may be equipped with an automatic transfer switch. When the
generator is turned on, this switch automatically transfers from shore power to
generator power. There will be a slight delay between the start of the generator
and the electrical connection. This delay allows the generator to reach normal
operating speed without needing to supply a required load. When the unit is
plugged into the outside power source, a click will be heard in the transfer
switch box. The sound is normal and indicates that the unit is changing over
to the outside power source.
Wiring Connector
Standard on your motorhome is a class five, 10,000 pound car towing hitch.
This allows the consumer the capability of towing their passenger car while
traveling. Also installed with the hitch is the wiring pigtail to connect tail
lights, brake lights, turn lights, etc. of the towed vehicle with that of the
motorhome. The pigtail used is the standard seven-pin connector. The color
scheme for the pigtail is as follows:
Stop & Left Turn Signal..... Red
Ground........................ White
Stop & Right Turn Signal...Brown
Clearance & Tail Lights.....Green
Aux. Tow Connector Prep...Black
Back-up Lights................Yellow
Brakes..........................Blue
This view is looking into the tow vehicle
receptacle.
2006 Mountain Aire Diesel Pusher by Newmar
5:9