Sharp PN-Y556 Operation Manual page 40

Controlling the Monitor with a computer (RS-232C)
SETUP menu
Function
DATE/TIME SETTING
LAN SETUP DHCP client
IP Adress
Subnet mask
Default gateway
DNS1
DNS2
FTP ON/OFF
SELECT
MONITOR NAME
FTP Username
FTP Password
Telnet
USERNAME
Telnet
PASSWORD
ID SETTING ID NO.SETTING
ID NO. SETTING
(ONCE)
ID NO. SETTING
(SUBSEQUENT)
MULTI ENLARGE
ENLARGE MODE
IMAGE POSITION
(M x N)
BEZEL ADJUST
ENLARGE/
IMAGE POSITION
SETTING
THERMAL SENSOR SETTING
ADJUSTMENT MONITOR
LOCK BUTTONS
REMOTE
CONTROL
Autoplay
ALL RESET
40
E
Command Direction Parameter
DATE WR AABBCCDDEE
DHCP WR 0-1
IPAD WR XXXXXXXXXXXX
SBMK WR XXXXXXXXXXXX
DFGW WR XXXXXXXXXXXX
DNS1 WR XXXXXXXXXXXX
DNS2 WR XXXXXXXXXXXX
FCHE WR 0-1
MNTR WR XXXXXXXX
XXXXXXXX
FUSR WR XXXXXXXX
FPAS WR XXXXXXXX
USER WR XXXXXXXX
PASS WR XXXXXXXX
0-25
IDST W
R
IDSL W 1-25
0
IDLK W 1-25
0
ENLG WR 0-1
EMHV WR 11-55
EPHV WR 11-55
BZCO WR 0-1
ESHV WR XXYY
STDR WR 0-3
ALCM WR 0-1, 3
ALCR WR 0-3
ATPL WR 0-1
RSET W 1
Reply
AABBCCDDEE AA: Year, BB: Month, CC: Day, DD: Hour, EE: Minute
0-1 0: OFF, 1: ON
XXXXXXXXXXXX X: Only number is ok. If the number is less than three digits, to three digits to fill zero.
Example: 192168150001
XXXXXXXXXXXX X: Only number is ok. If the number is less than three digits, to three digits to fill zero.
Example: 255255255000
XXXXXXXXXXXX X: Only number is ok. If the number is less than three digits, to three digits to fill zero.
Example: 000000000000
XXXXXXXXXXXX X: Only number is ok. If the number is less than three digits, to three digits to fill zero.
Example: 000000000000
XXXXXXXXXXXX X: Only number is ok. If the number is less than three digits, to three digits to fill zero.
Example: 000000000000
0-1 0: FTP connection OFF, 1:FTP connection ON
XXXXXXXX X: Sixteen characters or less; half-width alphanumeric characters, "-", and "_".
XXXXXXXX (The field cannot be left blank, and spaces cannot be entered.)
XXXXXXXX X: Eight characters or less; half-width alphanumeric characters, "-", and "_".
(The field cannot be left blank, and spaces cannot be entered.)
XXXXXXXX X: Eight characters or less; half-width alphanumeric characters, "-", and "_".
(The field cannot be left blank, and spaces cannot be entered.)
XXXXXXXX X: Eight characters or less; half-width alphanumeric characters, "-", and "_".
(The field can be left blank, but spaces cannot be entered.)
XXXXXXXX X: Eight characters or less; half-width alphanumeric characters, "-", and "_".
(The field can be left blank, but spaces cannot be entered.)
Sets the monitor's ID number. ("0" means "no ID number".)
0-25 Returns the monitor's ID number.
Sets a monitor ID number.
This ID number is only effective for the command immediately after this
command.
Clears the ID number if one has been designated.
Sets a monitor ID number.
This ID number is effective for the next and all subsequent commands after this
command.
Clears the ID number if one has been designated.
0-1 0: OFF, 1: ON
11-55 1 x 1 (OFF) to 5 x 5 ("m x n" is expressed as "mn", where m and n are the
numbers of monitors specified for the longest direction and the shortest direction
respectively.)
11-55 Specifies values in the order of IMAGE POSITION IN LONGEST/ SHORTEST
DIRECTION.
0-1 0: OFF, 1: ON
XXYY XX: ENLARGE MODE (Same as EMHV), YY: IMAGE POSITION (Same as
EPHV)
0-3 0: LANDSCAPE, 1: PORTRAIT, 2: FACE UP, 3: FACE DOWN
0-1, 3 0: UNLOCKED, 1: LOCK ALL, 3: LOCK EXCEPT POWER
0-3 0: UNLOCKED, 1: LOCK ALL, 2: LOCK EXCEPT VOLUME,
3: LOCK EXCEPT POWER
0-1 0: PHOTO, 1: MOVIE
Control/Response contents *
○
-
○
-