Turning Power On/Off; Turning On The Main Power - Sharp PN-Y556 Operation Manual

Caution
• Turn on the monitor first before turning on the computer or
playback device.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
A short interval may result in a malfunction.

Turning on the main power

When the main power is turned on, the power LED lights. Wait
until the screen is displayed.
Main power switch
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• For a complete electrical disconnection, pull out the main
plug.
18
E

Turning Power On/Off

Turning power on/off
Press the POWER button to turn the power ON/OFF.
Power LED
Status
Green lit
Orange lit
Green flashing
TIPS
• When the main power switch is off, the monitor cannot be
turned on.
• If the monitor is in input signal waiting mode and you press
the POWER button on the remote control unit, the monitor
enters standby mode.
• Setting the SCHEDULE flashes the power LED alternately
in red and orange in standby mode.
POWER button
Status of the monitor
Power on
Power off (Standby mode)
Input signal waiting mode