Table of Contents
Advertisement
POWER MANAGEMENT
POWER MANAGEMENT determines whether or not to switch modes from no signal to the input signal standby mode.
AUTOPLAY (See page 22.)
Set the type of file to be automatically played from a USB flash drive or an SD memory card.
SUPPLY USB POWER
ON ............................ Power can be supplied from a powered USB port.
OFF .......................... Power is not supplied from a powered USB port. Turn off the power of the connected device before
changing the setting to OFF. Otherwise there is a risk that data in the connected device will be lost.
ALL RESET
Resets the settings to the factory default settings. (The settings in LAN SETUP are retained.)
TIPS
• If COLOR MODE is set to sRGB, the following items cannot be set.
WHITE BALANCE, PRESET, USER and GAMMA
• When the COLOR MODE is set to HIGH ILLUMINANCE or VIVID, GAMMA can not be adjusted.
• When ENLARGE is used, the SCREEN MOTION function is disabled.
• Even when LED is set to OFF, the power LED will alternately blink red and green if a temperature alert occurs.
• When SUPPLY USB POWER is set to ON, POWER SAVE MODE cannot be set to ON.
Menu Items
31
E
Advertisement
Table of Contents
