Basic Operation; Turning On And Off The Main Power; Standby; Switching The Tv/Video Modes (Av1/Av2/Av3/Component/Tv) - Sharp Aquos LC-22GA3M Operation Manual

Basic Operation

Turning On and Off the Main Power

POWER indicator
● Press MAIN POWER. The POWER indicator instantly
changes from red to green and the LCD TV set is turned
on.
On-screen display
NOTE
• The on-screen display disappears after a few seconds.
● To turn off the main power, press MAIN POWER again.

Standby

To turn off the LCD TV
Press POWER. The POWER indicator will turn red.
To turn the LCD TV back on
Press POWER again. The POWER indicator will turn green.
10
LC-22GA3MX_E_P10-11.p65
MAIN POWER
1
P A L
B / G
10

Switching the TV/VIDEO Modes (AV1/AV2/AV3/COMPONENT/TV)

1
Turn on the power of the connected video equipment.
2
Press TV/VIDEO to select the applicable input source.
The screen changes in order of COMPONENT, AV1,
AV2, AV3 and TV mode each time TV/VIDEO is pressed.
COMPONENT mode
COMPONENT
AV1 mode
AV2 mode
AV3 mode
TV mode
NOTE
• COMPONENT:
Select this mode when viewing the signals from the video
equipment connected to the COMPONENT terminal.
• AV1: Select this mode when viewing the signals from the video
equipment connected to the AV-IN1 terminal. The S-VIDEO
terminal is additionally provided for the AV-IN1 terminal. If
both S-VIDEO terminal and VIDEO terminal are connected
with cables, the S-VIDEO terminal takes priority.
• AV2: Select this mode when viewing the signals from the video
equipment connected to the AV-IN2 terminal.
• AV3: Select this mode when viewing the signals from the video
equipment connected to the AV-IN3/OUT terminal. AV3 mode
is used to adjust the preset settings and In or Out can be
selected. AV3 indication is not displayed when Out is
selected. (For details on setting "AV3 IN/OUT", see page 21.)
2004.9.9, 5:48 PM
48 P 0
AV1
PAL
AV2
PAL
AV3
PAL
12
PAL
B/G