Replacing The Neck Strap - Panasonic WX-LT350 Operating Instructions Manual

Infrared
Hide thumbs Also See for WX-LT350:
Table of Contents

Advertisement

Replacing the neck strap

• When replacing the neck strap, turn off the power of the microphone, and make sure that
the microphone is not connected to the charger.
Remove the neck strap from the microphone.
1
Hold two portions of one side of strap with
your fingers firmly, and push the portions
toward the center of the clip.
2
While pinching the clip to open, pull the
strap out of the claw.
Remove the other side of the neck strap in the
same way.
When attaching a neck strap to the
microphone, hook each side of the
strap to each claw, and reverse the
above procedure.
After the neck strap is attached to the micro-
phone, make sure both sides of neck strap are
hooked to the claws.
Important:
• Use only the neck strap that is intended for this microphone.
(This neck strap is provided with a safety closure to prevent strangling.)
Otherwise, that may result in accidental injury.
24
Clip
Neck strap
Pinch.
Neck strap
Clip
Hold and push.
Pull out.
Claw
Claw

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wx-lt350e

Table of Contents