Sp1.7 Specifications - Bryston SP1.7 Series Instructions Manual

SP1.7 SPECIFICATIONS

Inputs
Analog Audio:
Digital:
Infrared:
RS-232:
Outputs
Analog Outputs:
Trigger:
Remote
30 button, Hand-Held, Infrared remote control unit operates with two AAA batteries (included).
Performance Specifications
A/D Conversion:
D/A Conversion:
DSP Engine:
Power Supply:
Frequency Response:
THD+Noise:
Signal-to-Noise Ratio:
Input Level:
Input Impedance:
Output Level:
Output Impedance:
Bass Management:
Physical Specifications
Power Requirements
Dimensions:
Weight:
Chassis Temp:
Specifications subject to change without notice.
36
Six stereo (RCA) pairs, One 5.1 channel (RCA) input
4 coaxial (RCA) 75 Ohms, 2 Optical (TOSLINK?), conforms to S/PDIF standard.
Pro version 1 AES/EBU input (XLR) 110 Ohms
1 mini phone jack
D9 connector (bidirectional)
Left, Centre, Right, Right Surround, Left Surround, and Subwoofer on 6 unbalanced
(RCA) and 6 balanced (XLR).
2 stereo (RCA) pairs of Record Outputs.
1 pair (RCA) Surround Back outputs
One 12V on/off trigger, One 12V programmable trigger, to source 80mA total.
24-Bit, 48kHz Delta-Sigma
24-Bit, 96kHz Delta-Sigma
Motorola 56367
Dual, Linear, Toroidal
20Hz to 20kHz +/- 0.25 dB
Less than 0.006% in DSP modes; Less than 0.0025% in Bypass mode 20Hz to
20kHz at maximum output level.
105dB in DSP Modes; 110dB in 2ch Bypass Mode ; 22kHz bandwidth, Ref. 1kHz at
maximum output level
2 Vrms in DSP modes; 4 Vrms in Bypass Mode
50kOhms
8 Vrms (16 Vrms Balanced) in DSP Modes; 10 Vrms (20 Vrms Balanced) in Bypass Mode.
110 Ohms
2nd Order HPF(x5), 4th Order LPF; 60 – 220 Hz Crossover Freq.
100VAC, 115VAC, and 230VAC models. 200 VA. IEC detachable power cord (included)
17" W x 13.5" D x 3.8" H; rackmount 19" W x 13.5" D x 3.5" H
approx 22 lbs (10 kg)
0 to 50 deg Celsius