Radio - Kenwood KDC-210U Instruction Manual

RADIO

Search for a station
1
Press L SRC to select TUNER.
2
Press repeatedly (or press
FM1/ FM2/ FM3/ AM.
Press 4 / ¢ (or press 4 / ¢ (+) on RC-406) to search for a
3
station.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6) (or
press one of the number buttons (1 to 6) on RC-406).
Direct Access Tuning (using RC-406)
1 Press AM– / #FM+ to select a band.
*
2 Press DIRECT to enter Direct Access Tuning.
"– – – • –" (for FM) or "– – – –" (for AM) appears on the display.
3
Press the number buttons to enter a frequency.
Press 4 / ¢ (+) to search for a frequency.
4
• To cancel, press .
• If no operation is done for 10 seconds after step
is automatically canceled.
AM– / #FM+ on RC-406) to select
*
3
, Direct Access Tuning
Other settings
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [SETTINGS], then press the knob.
3 Turn the volume knob to make a selection (see the following table),
then press the knob.
4 Press and hold to exit.
Selects the tuning method for the 4 / ¢ buttons.
SEEK MODE
AUTO1: Automatically searches for a station. ; AUTO2: Searches for a preset
station. ; MANUAL: Manually search for a station.
AUTO YES: Automatically starts memorizing 6 stations with good reception. ;
MEMORY NO: Cancels. (Selectable only if [NORM] is selected for [PRESET TYPE].)
(➜ 4)
MONO SET Selectable only for FM band.
ON: Improves the FM reception, but the stereo effect may be lost. ;
OFF: Cancels.
Default: XX
ENGLISH | 5