Set Sensor, Scan Front Sensor; Transport Roller - Sharp AL2020 Service Manual

4)
D. Set sensor, scan front sensor
1) Remove the set sensor.
2) Remove the scan front sensor.
3) Disconnect the connectors.
∗ When assembling, attach the blue harness to the marking B
side of the sensor, and attach the orange harness to the oppo-
site side sensor.
3)
E. Transport roller
1) Remove the actuator.
2) Remove the transport roller.
3) Remove the gear and the bearing.
1)
2)
3)
1)
2)
3)
3)
2)
1)
AL-2040 DISASSEMBLY AND ASSEMBLY 8 - 18