Technoline WT171 Instruction Manual

FEATURES:

- Radio controlled clock

- Manual time setting

- 12-or 24-hour time display
- Calendar display
- Time zone (+/- 12 hours)
- Indoor temperature in °C/°F
- Alarm snooze function
- 5 languages selectable display in Day-of –week: German, English, Spanish, Italian and French
- Jumbo LCD
- Back-light
If you want to take your product to Europe, it will automatically find the radio controlled time signal. If
you want to go to the UK, please follow the manual time setting option.

SETTING UP:

1. Firstly, open the battery cover at the back of the clock.
2. Checking the correct polarization, insert 2 x AA, LR06, 1.5V batteries into the compartment and
replace the cover.
3. When the batteries are inserted, the clock will be automatically scanning for the radio controlled
time signal.
4. If after 6 minutes the DCF time has not been received, you can manually set the time. (see chapter
manual time setting)
5. If the clock cannot receive the signal at the first time, it will automatically attempt to receive the
signal again one hour later.
6. The clock will automatically receive the signal everyday 2.00 am.
7. When the clock is scanning for signal, only the WAVE key is operational.
MANUAL TIME SETTING:
In some cases after inserting the batteries, the clock may not be able to receive the DCF signal. In this
situation, the time should be set manually.
Press and hold the TIME SET key for 3 seconds and the "hour" digits will start flashing, press UP
1.
or DOWN key to adjust the hour.
Press the TIME SET key again and the "minute" digits will start flashing, press the UP or DOWN
2.
key to adjust the minute.
Press the TIME SET key again and the "second" digits will start flashing, press the UP or DOWN
3.
INSTRUCTION MANUAL WT 171