Chorus Level; Harmony Type; Harmonyspeed - Medeli DP 330 Owner's Manual

Chorus level
1.
Holding down [SHIFT] button, and then press [FUNCTION
button to select chorus level
Use [+/YES]/ [-/NO] or data dial to change chorus
Range: 0~127
2.
Press [+/YES] and [-/NO] simultaneously will set the chorus
to its default setting.
Note:
The chorus level default value depends on the voice.

Harmony Type

1.
Holding down [SHIFT] button, and then press [FUNCTION
button to select harmony type menu. LCD displays "xxx
Use [+/YES]/ [-/NO] or data dial to change harmony type.
The harmony types are as follows:
Number LCD Display
1 Duet
2 StandardTrio
3 Full Chord
4 Rock Duet
5 Country Duet
6 Country Trio
7 Block
8 4 Close 1
9 4 Close 2
10 4 Open
11 1+5
12 Octave
13 Strum
14 Echo
15 Tremolo
16 Trill
2.
Press [+/YES] and [-/NO] simultaneously will set harmony type to
default setting: Duet.
3.
When the harmony type is echo, tremolo or trill, the speed of
harmony effect note can be adjusted. Please refer to the harmony
speed setting.
4.
When the harmony type is strum, echo, tremolo or trill, the tempo
setting will also change the harmony note speed.
Harmony Speed
When the harmony type is echo, tremolo or trill, the harmony speed
can set the harmony effect note speed to 4 default speed.
1.
Holding down [SHIFT] button, and then press [FUNCTION
button to select harmony speed menu. LCD displays "xxx
HarmonySpeed". Use [+/YES]/ [-/NO] or data dial to change
harmony speed. Range: 1~4.
2.
Press [+/YES] and [-/NO] simultaneously will set the chorus volume
to its default setting:001.
menu. LCD displays "xxx ChorusLev".
level .
</> ]
level
</> ]
xxxx".
</> ]
Function Menu
ChorusLev
Duet

HarmonySpeed

25