Function Menu; Tune; Keysplit - Medeli DP 330 Owner's Manual

Holding down [SHIFT] button, and then press [FUNCTION</>] button
to enter function menu. The LCD displays the current function menu
option. Use [+/YES]/ [-/NO] or data dial to set parameter of the current
menu.
The option and parameters are as follows:
No. LCD display Range
1 xxx Tune -50 ~ +50
2 xxx KeySplit 1 ~ 88
3 xxx BeatType 0, 2 ~ 9
4 xxx MetroVol 0~127
5 00x Pedal xxxx Sust,St/T, Mem
6 xxx ReverbLev 0 ~ 127
7 xxx ChorusLev 0 ~ 127
8 xxx xxxx Duet, StandardTrio, Full
Chord, Rock Duet, Country
Duet, Country Trio, Block,
4 Close 1, 4 Close 2,
4 Open, 1+5, Octave,
Strum, Echo, Tremolo, Trill
9 xxx HarmonySpeed 1 ~ 4
10 xxx Midi In 1 ~ 16，ALL
11 xxx Midi Out 1 ~ 16
12 xxx PowerOff OFF, 30,60
13 xxx Perform Beat 4-4, 3-4, 2-4, 6-8
Note:
The function menu status will exit if no operation is done within 5 seconds.

Tune

This function sets the pitch of entire keyboard by steps of cents.
1.
Holding down [SHIFT] button, and then press [FUNCTION
button to select tune menu. LCD displays "xxx Tune".
Use [+/YES]/[-/NO] or data dial to change tune value. Its range is
from -50 to 50 cents.
2.
Press [+/YES] and [-/NO] simultaneously will set the tune value to
its default setting:000. The setting is applied to both accompaniment
and the voice.

KeySplit

This function sets the point which separates the entire keyboard to two
sections.
1.
Holding down [SHIFT] button, and then press [FUNCTION
button to select keysplit menu. LCD displays "xxx KeySplit". Use
[+/YES]/ [-/NO] or data dial to change keysplit value. The range of
keysplit : 1~88.
2.
Press [+/YES] and [-/NO] simultaneously will set the keysplit value
to its default setting: F#3(34).
Note:
When twinova is on , the range of keysplit is C3~C6 (28~64). Press
[+/YES] and [-/NO] simultaneously will set twinova keysplit value to its
default setting: E3(32).
Default
000
034
004
080
Sust
Depend on voice
Depend on voice
Duet
1
ALL
001
030
4-4
</> ]
</> ]

Function Menu

Tune
KeySplit
23