Beattype; Metro Volume; Pedal Type; Reverb Level - Medeli DP 330 Owner's Manual

Function Menu
Beat Type
1.
Holding down [SHIFT] button, and then press [FUNCTION
button to select beat type menu. LCD displays "xxx BeatType".
Use [+/YES]/ [-/NO] or data dial to change beat type. The range of
beat type: 0, 2~9.
2.
Press [+/YES] and [-/NO] simultaneously will set the beat type value
to its default setting: 004.

Metro Volume

1.
Holding down [SHIFT] button, and then press [FUNCTION
button to select beat volume menu. LCD displays "xxx MetroVol".
Use [+/YES]/ [-/NO] or data dial to change beat volume. The range
of beat volume: 0~127.
2.
Press [+/YES] and [-/NO] simultaneously will set the beat volume
value to its default setting: 080.

Pedal Type

1.
Holding down [SHIFT] button, and then press [FUNCTION
to select pedal type menu. LCD displays "00x Pedal xxxx".
Use [+/YES]/ [-/NO] or data dial to change pedal type. 3 types of
pedal are available: Soft
Pedal(St/T), memory switch pedal(Mem).
2.
Press [+/YES] and [-/NO] simultaneously will set the pedal type to its
default setting: Soft .

Reverb Level

1.
Holding down [SHIFT] button, and then press [FUNCTION
to select reverb level menu. LCD displays "xxx Reverb
Use [+/YES]/ [-/NO] or data dial to change reverb
Range: 0~127
2.
Press [+/YES] and [-/NO] simultaneously will set the reverb
its default setting.
Note:
The reverb level default value depends on the voice.
24
pedal( Soft ), accompaniment start/stop
level
</> ]
</> ]
</> ] button
</> ] button
Lev ".
.
level to

BeatType

MetroVol
Pedal Soft
ReverbLev