The keyboard is an instrument with a variety of controls and functions,
the Registration Memory feature can make your performance more
easily and efficiently. It allows you to save virtually all panel settings to
a Registration Memory setting, and you can instantly recall custom
panel settings by pressing a single button.
Registering the Panel Setting
1.
There are 8 memory banks, and each bank has 4 memories
(M1-M4).
2.
Holding down the [STORE] button, press one of the registration
memory buttons: [M1] - [M4]. Notice that the new settings will
replace the previous memory data.
Note:
Press [STORE] and [M1] button then power on, the registration
memory will be set to default.
Recalling the Registered Panel Settings
Press one of the registration memory buttons: [M1] - [M4]. In this
example, the panel settings stored in the memory 2 of bank 1 are
recalled.
Note:
Registration data cannot be recalled when the One Touch Setting
function is on.
Selecting a Registration Bank
1.
Press the [BANK] button. There are 8 banks in all and each bank
has 4 memories(M1-M4). Press the [BANK] button, the LCD
displays "Mem Bank".
2.
Select a bank. Use the data dial, [+/YES] or [-/NO] button to select a
bank from 1 to 8.
Accompaniment Freeze
When Freeze is switched on, style settings (style number,
accompaniment section, accompaniment volume, tempo, transpose,
chords, mixer, split point) will not change even when a registered
memory is recalled.
1.
Press the [FREEZE] button, the LCD will display FREEZE indicate.
Now the accompaniment parameters would not be changed when
recalling registered memory.
2.
In freeze status, press the [FREEZE] button. The freeze function is
turned off. The freeze indicate on LCD will light off.
Register Memory
Mem Stor
StGrdPno
StGrdPno
27