Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Laserworld CS-400RGY
Summary of Contents for Laserworld CS-400RGY
- Page 1 CS-400RGY USER MANUAL Please read this manual carefully before use!
-
Page 2: Table Of Contents
USER MANUAL: Laserworld CS-400RGY Page 2 of 9 Table of contents Page 1. SAFETY INSTRUCTIONS 2. OPERATING DETERMINATIONS 3. OPERATION 4. AUTO- MUSIC-MODE 5. OPERATION WITH DMX 6. ILDA OPERATION 7. MAINTENANCE 8. TECHNICAL SPECIFICATIONS Checking Parts Please check if the following parts are included:... -
Page 3: Safety Instructions
USER MANUAL: Laserworld CS-400RGY Page 3 of 9 DANGER LASER RADIATION! Avoid direct eye exposure! Laser radiation can cause eye damage and/or skin damage All protective measures for a safe operation of this laser must be applied. 1. SAFETY INSTRUCTIONS If the device has been exposed to drastic temperature fluctuation, do not switch it on immediately. -
Page 4: Operating Determinations
USER MANUAL: Laserworld CS-400RGY Page 4 of 9 2. OPERATING DETERMINATIONS 6. The operator has to make sure that laser radiation – also reflected laser radiation –higher than the highest allowed level is avoided by technical or organisational measures. 7. Make sure that the used voltage is : AC 220V~240V, 50/60Hz 8. -
Page 5: Operation
USER MANUAL: Laserworld CS-400RGY Page 5 of 9 3. OPERATION Please note: for sound/DMX mode the two switches on the back of the device labelled “BLANKING” and “X/Y” have to be up. When both switches are down the device can be controlled by an ILDA output (such as our USB-Box). - Page 6 USER MANUAL: Laserworld CS-400RGY Page 6 of 9 The device uses 13 channels, so if you set the first on DMX address “1” the second should be DMX address “14” and so on. The DMX channels are as following: channel Function Mode: 0-69 laser off;...
-
Page 7: Ilda Operation
You can now control laser output with a PC, using for example our ShowEditor 2006 software. Laserworld offers a variety of music synchronous lasershows for ShowEditor 2006. Date: 01/2008... -
Page 8: Maintenance
Laserworld cannot be made liable for damages caused by incorrect installations and unskilled operation! - Page 9 After installing the device, an inspection and official approval is indispensable for the overall setup. The inspection must follow the european guidelines EN 60825-1 and corresponding regulations for the prevention of accidents BGV-B2. This declaration is executed on behalf of the CS-400RGY Laser manufacturer. Laserworld (Switzerland) AG Oberstrasse 1 8274 Tägerwilen...
Need help?
Do you have a question about the CS-400RGY and is the answer not in the manual?
Questions and answers