Hytera MD782 User Manual

MD782 User Guide
Quick Reference
Radio Guide for
Channel / Volume Knob
Accessory Port
Short Press
Long Press
Short Press
Long Press

Radio Operation

Volume Controls

• Turn the channel / volume knob to adjust the volume of the radio
• If you are changing the channels you will need to wait a few seconds
after changing the channel for the default volume setting to adjust the
volume again

Viewing Text Messages

• When the radio receives a text message it will beep & display a mail
icon
• Pressing the select button will allow you to view the message
• If multiple messages have been received, pressing the select button
will display a list of messages
• You can highlight the messages using the scroll button
• Pressing the select button again will allow you to view the highlighted
message
Transmitting Voice Calls
• To initiate a transmission hold the Push to Talk (PTT) Button
• Once you press the PTT Button, the radio will emit a talk permit chirp
• This talk permit chirp signals that you can begin to speak
• When done speaking release the PTT Button
• For a set period of time the system resources are held to allow
immediate responses
• If there is no response within this period the system will be released
signaled by a call ended chirp
Receiving Voice Calls
• Mobiles automatically receive transmissions on the Talkgroup
• When receiving the screen will display the Talkgroup & the Radio ID /
Alias of the transmitting unit
Quick Reference User Guide
Front View
Back
Menu / Select
Short Press
Long Press
Turning the Radio On
• Press and hold the on / off power button to power on the radio
• If the radio is tuned to a non‐programmed channel it will emit a continuous
error tone
• Please reference the zone / channel list to select the appropriate channel
Sending Text Messages
• To send a text, press the select button to display the menu
• Use the scroll button to scroll down to the quick text option & press the
select button
• This will display the pre‐programmed text messages
• Use the scroll button to scroll until the desired message is highlighted then
press the select button
• Once completed, press the select button to confirm & select the send option,
then select contact list
• Use the scroll button to scroll to the desired contact & press the select button
to send
Transmitting Voice Calls Out of Talkgroup
• To call outside your talkgroup press the contact list button to bring the list on
the screen
• Use the scroll button to highlight the desired contact
• Press the PTT Button & you will transmit on the selected contact's talkgroup
• The radio will stay on the selected group until a set time of inactivity or
canceled via the home button
Channel Controls
• There are zones
• Each zone has channels programmed
• To switch zones
• To switch channels push the center of the channel / volume knob and then
turn the knob to the desired channel, after a few seconds the knob will
default back to the volume controls
Short Press
Long Press
Power Button
Short Press
Long Press
Speaker
Scroll Up
Scroll Down
Short Press
Long Press