Headlight Replacement Instructions - M.T.H. Premier Norfolk & Western 4-8-4 J Steam Locomotive Operator's Manual

Headlight Replacement Instructions

The locomotive's lights are controlled by a constant voltage circuit in the engine. They
are easy to remove and replace when they burn out. See the diagrams and directions
below for instructions on accessing and replacing the light bulbs in this locomotive.
Figure 13
Headlight:
The locomotive's headlight is controlled by a constant voltage circuit in the engine.
The headlight is easy to remove and replace when it burns out. The bulb has a quick
disconnect plug that attaches the bulb harness to a light circuit. Replacement bulbs are
available directly from the M.T.H. Parts Department.
1. Remove boiler from chassis as shown in Figure 11 on page 14
2. Pull wires from inside boiler
3. Unplug connector
4. Remove bulb from headlight shell
5. Install new bulb in reverse order
Premier Norfolk & Western J Steam Locomotive 17