USB receiver dongle (stored inside Presenter) Laser Specifications: • 2 x AAA batteries The laser used in the VP4590 complies as Class 2 laser product with: IEC/ • User guide EN 60825-1: 1994+A1+A2, and CFR Title 21 1040.10 and 1040.11, except for deviations pursuant to Laser Notice No.
Step 1 Step 2 Power on/off switch Install the Batteries Plug In the Receiver (Supplied) • Retrieve the USB receiver dongle from the built-in storage • Open the battery compartment bay on the Presenter. by pressing down the • Connect the USB receiver cover latch and sliding the dongle to an available USB port door off the Presenter.
Step 3 LED Indicators Laser Button LED Description Use the Presenter Red LED on for 3 Seconds Power on Mouse buttons SpeedScroll wheel LED Indicator Description Power switch Cursor control Blinking Red LED Battery low Solid Green LED laser beam active Slide control Laser LED Blinking Green / Red LED...
SMK-Link shall not be liable for any indirect special, incidental, or consequential damages. SMK-Link’s total liability for damages for any cause related to, or arising out of, the use or inability to use the Product shall not exceed the original price paid for the Product even if SMK-Link has been informed of such possibility.
rights which vary from state to state and country to country. This warranty which can be determined by turning the equipment on and off, the user is encouraged is understood to be the complete and exclusive agreement between the to try to correct the interference by one or more of the following measures: •...
SMK-Link Electronics to meet your wireless needs SMK-Link Electronics Corporation and look forward to serving you in the future. To learn about new SMK-Link 3601-B Calle Tecate products as they become available, and to ensure the best possible customer Camarillo, CA 93012 support, please register your product online at www.smklink.com/register.
Need help?
Do you have a question about the VP4590 and is the answer not in the manual?
Questions and answers