Punching File Holes In Copies (Punch); Function Overview - Konica Minolta bizhub 360 User Manual

Hide thumbs Also See for bizhub 360:

Table of Contents

Finishing/Folding

Punching File Holes in Copies (Punch)

The Punch mode is available on the machine with Finisher FS-511 installed,

or if Finisher FS-510 mounted with Punch Unit PU-501 option is installed.

Finisher FS-510 is initially equipped with two exit trays, and one optional

exit tray (OT-601) can be installed. Contact your service representative, if

desired. (Already installed in the above illustration.)

The Original Direction setting for the samples below is supposed to be the

one which the top of the original is aligned to the rear side of the machine.