Advertisement
2-19: LOADING GEAR S/T ASS'Y (Refer to Fig. 2-19-A)
Remove the E-Ring 1 and remove the Main Loading
1.
Gear.
2.
Remove the Capstan Brake Spring.
3.
Slide the Main Rod and remove the Capstan Brake
Arm Ass'y.
4.
Remove the Main Rod.
5.
Remove the Tension Lever.
Unlock the 2 supports 2 and remove the Clutch Lever.
6.
Remove the screw 3.
7.
8.
Remove the LED Reflecter.
Remove the Loading Arm S Ass'y and Loading Arm T
9.
Ass'y.
Remove the Loading Gear S and Loading Gear T.
10.
11.
Remove the Loading Gear Spring.
Capstan Brake Spring
Main Rod
Clutch Lever
2
2
LED Reflecter
NOTE
When you install the Loading Arm S Ass'y, Loading Arm T
Ass'y and Main Loading Gear, align each marker. (Refer
to Fig. 2-19-B)
Main Loading Gear
Marker
Loading Arm T Ass'y
DISASSEMBLY INSTRUCTIONS
Capstan Brake Arm Ass'y
1
Main Loading Gear
Tension Lever
Loading Gear T
Loading Gear
3
Spring
Loading Arm T Ass'y
Loading Gear S
Loading Gear
Spring
Loading Arm S Ass'y
Fig. 2-19-A
Marker
Loading Arm S Ass'y
Fig. 2-19-B
2-20: INCLINED S/T ASS'Y (Refer to Fig. 2-20)
Unlock the support 1 and remove the P4 Cover.
1.
2.
Remove the S-S Brake Spring.
Unlock the support 2 and remove the Loading Gear
3.
Holder.
4.
Remove the S-S Brake Arm.
5.
Remove the Inclined S.
6.
Remove the Inclined T.
Remove the 2 screws 3, then remove the Guide Roller.
7.
NOTE
Do not touch the roller of Guide Roller.
Guide Roller
3
Inclined S
• Screw Torque: 0.7 ± 0.2kgf•cm
Loading Gear Holder
2
S-S Brake Spring
S-S Brake Arm
Guide Roller
3
Inclined T
1
P4 Cover
Fig. 2-20
Advertisement
