Pairing Test - CipherLab 8400 Reference Manual

8400 Series Mobile Computer

3.7.5 PAIRING TEST

The pairing procedure is for the creation and exchange of a link key between two
Bluetooth-enabled devices. The devices use the link key for future authentication when
exchanging information.
1) The mobile computer will start with making an inquiry so that the system can
generate a list of device(s) that has been discovered nearby.
2) Select a desired target device.
For the device name, it can only display a maximum length of 11 characters. When
the device name is too long, it will be truncated automatically.
3) Select a Bluetooth service from the "Target Machine" menu. To stop and exit the test,
press [ESC].
After pairing successfully, the target device will be added to the Frequent Devices List
for quick connection in the future.
Note: For the initial use of Bluetooth networking, the pairing procedure must be done
before the Echo tests.
60
Reference Manual