Brother 888-H72 Operating Manual page 41

d Hold the presser foot holder in place with your right
hand, and then tighten the screw using the screwdriver
in your left hand.
Turn the screw toward you (clockwise).
1
1 Screwdriver
CAUTION
• Be sure to securely tighten the presser foot
holder screw, otherwise the presser foot
holder may fall off and the needle may strike
it, causing the needle to bend or break.
Note
• If the presser foot holder is not correctly
installed, the thread tension will be incorrect.
Replacing the Presser Foot
Basic operations B-33
B