Controls And Indicators - Sharp HT-SB40 Operation Manual

Sound bar home theater system
Hide thumbs Also See for HT-SB40:
Table of Contents

Advertisement

Precautions
General
Please ensure that the equipment is positioned in a
well-ventilated area and ensure that there is at least
4" (10 cm) of free space as shown below.
4" (10 cm)
4" (10 cm) 4" (10 cm)
Use the unit on a firm, level surface free from vibration.
Keep the unit away from direct sunlight, strong
magnetic
fields,
excessive
electronic/electrical
facsimiles, etc.) which generate electrical noise.
Do not place anything on top of the unit.
Do not expose the unit to moisture, to temperatures
higher than 140°F (60°C) or to extremely low
temperatures.
If your system does not work properly, disconnect the
AC power cord from the AC outlet and replug.
In case of an electrical storm, unplug the unit for safety.

Controls and indicators

Sound Bar Front Panel
1. Left Channel Speakers
2. Right Channel Speakers
3. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . 11, 14
4. SOURCE Button . . . . . . . . . . . . . . . . . . . . . 9, 10, 13
5. Pairing Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4" (10 cm)
4" (10 cm)
4" (10 cm)
4" (10 cm)
dust,
humidity
equipment (home
computers,
1
3 4 5
6
Reference page
Hold the AC power plug by the head when removing it
from the AC outlet, as pulling the cord can damage
internal wires.
The AC power plug is used as a disconnect device and
shall always remain readily operable.
Do not remove the outer cover, as this may result in
electric shock. Refer internal service to your local
SHARP service facility.
This unit should only be used within the range of 41°F -
95°F (5°C - 35°C).
SHARP is not responsible for damage due to improper
use. Refer all servicing to a SHARP authorised service
center.
Warnings:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may
result in a fire or other type of accident causing
damage. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage
other than that which is specified.
In case of repairing, please bring the entire system set
to the service center.
Volume control
and
The sound level at a given volume setting depends on
speaker efficiency, location and various other factors. It is
advisable to avoid exposure to high volume levels, which
occurs while turning the unit on with the volume control
setting up high, or while continually listening at high
volumes.
7
6. Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . .11
7. Demo Indicator . . . . . . . . . . . . . . . . . . . . . . . .11, 15
8. Sound Mode Button . . . . . . . . . . . . . . . . . . . .12, 14
9. Volume Down Button. . . . . . . . . . . . . . . . . . . . . . .12
10. Volume Up Button . . . . . . . . . . . . . . . . . . . . . . . . .12
E-4
2
8
9 10
Reference page

Advertisement

Table of Contents
loading

Table of Contents