Panasonic PT-AH1000E Operating Instructions Manual page 48

[PICTURE] menu
5) Press the ▲▼ buttons to select a menu
item and the ◄► buttons to adjust each
item level.
[COLOUR]
[TINT]
[BRIGHTNESS]
The default setting for each item is [0].
z
After adjusting, the post-adjustment color (D) is
displayed.
CURSOR
ENTER
SELECT
Screen
6) Press the <ENTER> button.
[PROCESSING] message is displayed for a few
z
seconds and the result is stored in [LOG].
You can store up to 8 logs under [LOG]. Press
the <RETURN> or <MENU> button to adjust
the other colors. Repeat from step 3) to store
more adjustments.
7) Press the <RETURN> button or <MENU>
button twice.
This returns you to the [COLOUR
z
MANAGEMENT] menu.
48 - ENGLISH
Adjust the vividness of the
color.
Setting range:
z
−30 to +30
Adjust the color tone.
Setting range:
z
−30 to +30
Adjust the brightness of the
color.
Setting range:
z
−20 to +20
COLOUR 0
DEFAULT
TINT 0
BRIGHTNESS 0
RETURN
Adjusting the selected color (when
z
[RGBCMY] is selected for [ADJUSTMENT
MODE])
Select the color from 6 different color types ([RED],
[GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW]) and
adjust [COLOUR], [TINT] and [BRIGHTNESS].
1) Press the ◄► buttons to select [RGBCMY]
in [ADJUSTMENT MODE].
COLOUR MANAGEMENT
PROFILE NORMAL
ADJUSTMENT MODE RGBCMY
START ADJUSTMENT
LOG
2) Press the ▲▼ buttons to select [START
ADJUSTMENT] and press the <ENTER>
button.
3) Press the ▲▼ buttons to select your
desired color and press the <ENTER>
button.
RGBCMY ADJUSTMENT
RED
GREEN
BLUE
CYAN
MAGENTA
YELLOW
ALL DELETE
Menu (B) and the base color (C) is displayed.
z
RED
COLOUR
DEFAULT
ENTER
TINT
SELECT
BRIGHTNESS
RETURN
Screen
0
0
0