Panasonic PT-AH1000E Operating Instructions Manual page 45

d. Changing the adjustment by different color
types
The settings change as follows each time the
z
<ENTER> button is pressed.
Y ADJUST
B ADJUST
You can also switch each different color adjustment
menu through the [GAMMA ADJUSTMENT] menu.
Select your required color adjustment ([Y ADJUST],
[R ADJUST], [G ADJUST], [B ADJUST]) with ▲ ▼
in the [GAMMA ADJUSTMENT] menu and press the
<ENTER> button.
GAMMA ADJUSTMENT
PICTURE ADJUSTMENT MODE
GAMMA HIGH
GAMMA MID
POSITION
GAMMA LOW
LANGUAGE POINT
Y ADJUST
R ADJUST
OPTION
G ADJUST
B ADJUST
INITIALIZE
R ADJUST
0%
POINT 5
e. Setting the output levels back to the default
setting
To set the output level on the selected point back
z
to the default setting "0", press the <DEFAULT>
button on the remote control.
Note
Individual input levels cannot be set back to their default
z
settings by pressing the <DEFAULT> button. Press
to move back themselves if needed.
R ADJUST
G ADJUST
ADVANCED
5
50% 100%
INPUT
INPUT 50% OUTPUT +10
[PICTURE] menu
●
Initialize the gamma adjustment results
GAMMA ADJUSTMENT
PICTURE ADJUSTMENT MODE
GAMMA HIGH
POSITION GAMMA MID
GAMMA LOW
LANGUAGE POINT
Y ADJUST
R ADJUST
OPTION
G ADJUST
B ADJUST
INITIALIZE
1) Press the ▲▼ buttons to select
[INITIALIZE] and press the <ENTER>
button.
The confirmation message is displayed for the
z
gamma initialization.
GAMMA ADJUSTMENT
INITIALIZE GAMMA ADJUSTMENT.
OK
2) Select [OK] with the
the <ENTER>button.
Your gamma settings in [ADVANCED] mode will
z
return to factory default settings.
Note
Initialization is not available in [SIMPLE] mode.
z
ADVANCED
5
CANCEL
buttons and press
ENGLISH - 45