Advertisement
Please note: Before any pyrolytic programme, remove all shelves,
trays and other accessories from the oven and clean up any major
spills to avoid the risk of fire or excessive smoke.
Do not hang towels or cloths on the oven handle during pyrolysis.
Turn the "Function control" knob to the "Pyrolytic clean" position.
The programme immediately locks the door and starts the cooling
fan at a slow setting; the cooling fan speed increases to its maximum
when the oven heat builds up.
The digital display shows "P1:30", the preset time of one hour and
thirty minutes. Also the "Auto timing indicator"
"Door lock" LED shows the status of the door lock at any time:
Off:
Flashing:
Full on:
The time for pyrolysis defaults to 90 minutes and can be set between
60-180 minutes in 15 minute increments .
To change the time, after setting the "Function control" knob:
• Press the "Temperature control" knob twice; the display shows the
time in minutes.
• Turn the "Temperature control" knob clockwise or anticlockwise to
select the time required.
• Approximately ten seconds after releasing the "Temperature control"
knob the display reverts to hours and minutes and stops flashing.
16
Door unlocked
Door being locked / unlocked
Door locked
is activated. The
Advertisement
