Summary of Contents for CrimeStopper BackStopper CA-5006
Page 1
System. The BackStopper™ is designed as a safety enhancement device and is in no way intended as a replacement for rear-view mirrors, side-view mirrors or physically checking the surroundings when backing a vehicle. Always check surroundings for safety when backing! CA-5006...
Page 2
CA-5006 SYSTEM DIAGRAM Display (Front Mount) 50 Ft. (Extended Cable) LOCATING THE SENSORS: 20 Inches from center of sensor to ground level BLACK Ground Beeper Control System (Rear mount) +12V Back up Light Sensors...
2. Use the supplied 22MM hole sale drill to make sensor holes. 3. Route cable through hole. 4. Gently press in sensor. Hole clearance is critical, make sure sensor fits snugly, but not over-tight. Crushed sensors will provide inaccurate readings and false triggers. CA-5006 Surface Mount Sensor...
Page 4
CA-504BRKT- Under bumper bracket for hanging sensors below bumper level. SIDE VIEW Optimum performance O.K. (May not detect small or low to ground objects.) Ground may interfere. Crimestopper Security Products Inc. 1770 S. Tapo St. Simi Valley, CA 93063 (800) 998-6880 www.crimestopper.com email@crimestopper.com...