Summary of Contents for CrimeStopper BackStopper CA-5004
Page 1
System. The BackStopper™ is designed as a safety enhancement device and is in no way intended as a replacement for rear-view mirrors, side-view mirrors or physically checking the surroundings when backing a vehicle. Always check surroundings for safety when backing! CA-5004...
Page 2
CA-5004 SYSTEM DIAGRAM Display (Front Mount) 50 Ft. (Extended Cable) LOCATING THE SENSORS: MINIMUM 20" BLACK Ground Beeper Control System (Rear mount) +12V Back up Light Sensors Space sensors equal distances apart...
2. Use the supplied 22MM hole sale drill to make sensor holes. 3. Route cable through hole. 4. Gently press in sensor. Hole clearance is critical, make sure sensor fits snugly, but not over-tight. Crushed sensors will provide inaccurate readings and false alarms. CA-5004 Surface Mount Sensor...
Page 4
SIDE VIEW Horizontal Optimum performance 0-10 degree upward O.K. (May not detect small or low to ground objects.) Downward Ground may interfere with sensor. Tech Support (800) 998-6880 1770 S. Tapo St. Simi Valley, CA 93063 (800) 998-6880 www.crimestopper.com email@crimestopper.com...